ISO 18752 MatrixFlex 3K Constant Working Pressure Hose

Applicable Specs:

Applications:

German Technology Equipment

Product Series:

Internal hose:

Synthetic rubber, extruded whole without joints, of uniform thickness
Reinforcement:
- 1 & 2 layer of high strength steel wire braid or 4 layers of steel wire spiral.
Covering:

Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions
Fittings:
- According to the following table.
- Certificate: MSHA & BV & GOST & IATF 16949 & ISO 9001 & ISO 14001 & ISO 45001 & DAKKS & SGS & MA & DEKRA Approved

Working Pressure:

3000 PSI / 210 Bar
Impulse times:
- Type AC – Impulse pressure 133%, Temperature 100 °C ≥ 200,000 Times;
- Type CC – Impulse pressure 133% (3K), Temperature 120 °C ≥ 500,000 Times
Temperature
- -40 °C to +120 °C (intermittent 121 °C)
- -40 °C to +70 °C for water based fluids
- 0 °C to +70 °C hot air
- Prolonged operation at extreme temperatures will reduce hoses life
Media
- Suitable for liquids (HL, HLP, HLPD, HVLP) in mineral oil and synthetic oil MatrixFlex-rices, water based emulsifiers (HFAE, HFAS, HFB) and water glycol solvents (HFC), as well as lubricants for vegetable oil and minerals.
- Not suitable for chlorinated carbon hydride MatrixFlex-rix and phosphate ester liquids (HFD-R/S/T). (Usually, biodegradable liquid substances can also be used with this product, but there are some limitations due to the special addition MatrixFlex-erials of the liquid manufacturer.)

Specification